OK so now I want to stick my foam nose bumper, other wise known as half a pool noddle/woggle, to the nose of my techno. Doc. Crash in Boards recommends a contact adhesive, which is not very specific. In the pitcture he uses something out of a tin but I can not make out the label.
Any suggestion? Ideally something that doesn't have a price hike because of an association with Sailing.
I wondered about epoxy or Araldite?SP? But It would seem to me you need something more flexible, but strong and watertight.
Glue suggestions
Moderator: Moderators
Glue suggestions
Graham
Dr Crash is right - a contact adhesive would be the best stuff. Comes in the name of "Bostik" or "Evo-Stik" from most hardware store. Epoxy would be too brittle.
Called "contact" adhesive 'cos you slime it on both surfaces to be joined, let it set for 10 mins, bring the two parts together and "CONTACT".
You'll probably find that contact adhesive will become brittle over time (years), but that shouldn't worry you.
Another alternative would be silicon sealant, but would be a dog to remove and clean up should you ever want to do so.
Called "contact" adhesive 'cos you slime it on both surfaces to be joined, let it set for 10 mins, bring the two parts together and "CONTACT".
You'll probably find that contact adhesive will become brittle over time (years), but that shouldn't worry you.
Another alternative would be silicon sealant, but would be a dog to remove and clean up should you ever want to do so.
It's an ill wind that never blows at all.